Troy MI Water Heater Installation – First Class Plumbing (248) 520-9197
If you are looking for experienced Troy MI Water Heater Installation, please call First Class Plumbing at (248) 520-9197 for immediate assistance. You may also click here to learn more about our water heater services.
How to Know if Your Water Heater is Bad
Check for Power Issues
Check for power if there is no hot water. While no hot water can be a sure sign that the water heater has failed, it could also mean the pilot light is out or the circuit breaker tripped.
Examine the Water
Examine the water that comes out of the hot faucet. If it appears rusty, this signals an upcoming failure of your water heater. Look for signs of muddy water or increased sediment in the water tank. Attach a hose to the drainage bib on the water heater, turn the unit off and drain it to examine its contents. Muddy water or increased sediment signals a potential failure of your water heater. When flushing the water heater, remember that the water that comes out of the hose bib at the front of the water heater is going to be extremely hot, as it will not be mixed with cold water. Use caution when flushing the water heater to avoid getting burned. Smell or taste the water. If the hot water has a metallic taste to it, this indicates that the water heater is close to breaking down.
Listen for Tell-Tale Sounds
Pay attention to the noises your water heater makes. While there will be normal sounds as the water heats, loud cracks and pops indicate an interaction between the heating elements inside the heater and the scale and mineral deposits built up on them.
Address Leaks Immediately
Take immediate action if you see leaking water around the water heater where none has leaked before. Disconnect the electricity or turn off the gas to the unit and let the water cool down before attempting to remove and replace the water heater. Leaking water indicates an internal failure in the water heater.
Plan for Maintenance
With the unit off or unplugged, attach a water hose to the hose bib at the bottom of the water heater. The hose bib is for draining the water heater. Let the cold water fill the water heater as you flush out any sediments or mineral build up. Scheduling a water heater flush once a year can result in extending the life of your water heater. Annually check the pressure relief valve to ensure it is working. Wear thick gloves before lifting up on the test release lever atop the water heater. If it is working properly, hot water escapes via the overflow pipe. source: homeguides.sfgate.com
For top rated Troy MI Water Heater Installation, please contact First Class Plumbing at (248) 520-9197 for expert help.